Select Page

Filled epoxy resins

Epoxy filled resins include various systems for models, moulds and room temperature patterns. Resins are formulated with different filler mixing properly spreaded from the quality and granulometric point of view. The production process has been studied and improved to equipe the product with the most lasting possible “shelf life”, that is to limit the phenomenon of sediment and cristallization. In order to guarantee the service required by the applications but especially to exactly adapt the system characterics to the application performance, our filled resins give the possibility to be matched to different hardeners. This is an advantage for the stock management on the part of users.

RESIN
RC 210
HARDENER
IPE 713
FINAL COLOUR
Black
MIXING RATIO (WEIGHT)
100:10
POT LIFE (min)
45-55
CHARACTERISTICS
Low viscosity epoxy filled system, for models and moulds. It can be furtherly filled with slate or aluminium. Foundry models, moulds, gaskets, supplied in set, is adapt to industrial floors repairing.
TECHNICAL DATA SHEET
RESIN
RC 215
HARDENER
IPE 768
FINAL COLOUR
Red
MIXING RATIO (WEIGHT)
100:15
POT LIFE (min)
25-35
CHARACTERISTICS
Medium viscosity system, filled by non-abrasive extenders. Foundry moulds, core boxes, forging dies, adding tools.
TECHNICAL DATA SHEET
RESIN
RC 216 F
HARDENER
IPE 741
IPE 743
IPE 775
FINAL COLOUR
Black
Black
Black
MIXING RATIO (WEIGHT)
100:12
100:12
100:7
POT LIFE (min)
40-50
180-200
50-60
CHARACTERISTICS
Epoxy system filled by iron. Standard with IPE 741, good thermal resistance with IPE 775. Big dimension foundry patterns and pattern plates, press tools.
TECHNICAL DATA SHEET
RESIN
RC 218
HARDENER
IPE 705
IPE 741
IPE 775
FINAL COLOUR
Blue
Blue
Blue
MIXING RATIO (WEIGHT)
100:5
100:12
100:6
POT LIFE (min)
60-65
35-45
60-80
CHARACTERISTICS
Epoxy system, abrasion resistant. With IPE 705, it is possible to cast on an Aluminium core for moulds realization. Low thermal expansion. With IPE 775 it has very good thermal properties.
TECHNICAL DATA SHEET
RESIN
RC 221 SB
HARDENER
IPE 721 SB
FINAL COLOUR
Black
MIXING RATIO (WEIGHT)
100:7
POT LIFE (min)
20-30
CHARACTERISTICS
Epoxy system for filling of silver frame. Good adhesion on silver foil. Suited for mechanical casting.
TECHNICAL DATA SHEET
RESIN
RC 223
HARDENER
IPE 723
FINAL COLOUR
Yellow
MIXING RATIO (WEIGHT)
100:14
POT LIFE (min)
1,0-1,5
CHARACTERISTICS
Epoxy system for patterns for polyurethane. It can be filled with quartz grains or slate to reduce the shrinkage and thermal deformation.
TECHNICAL DATA SHEET
RESIN
RC 226
HARDENER
IPE 726
IPE 727
FINAL COLOUR
Yellow
Yellow
MIXING RATIO (WEIGHT)
100:15,5
100:8
POT LIFE (min)
1,5-2,0
1,5-2,0
CHARACTERISTICS
SEpoxy system for moulds. It can be filled with quartz grains or slate to reduce the shrinkage and thermal deformation. Different viscosities.
TECHNICAL DATA SHEET
RESIN
RC 232
HARDENER
IPE 732
FINAL COLOUR
Beige
MIXING RATIO (WEIGHT)
100:25
POT LIFE (min)
40-55
CHARACTERISTICS
Filled epoxy system with an instantaneous thixotropy. Very long machinability time.
TECHNICAL DATA SHEET
RESIN
RC 262
HARDENER
IPE 762
FINAL COLOUR
White
MIXING RATIO (WEIGHT)
100:14
POT LIFE (min)
55-65
CHARACTERISTICS
Epoxy bicomponent filled and fluid system. Slow curing.
TECHNICAL DATA SHEET
RESIN
RC 273 N
HARDENER
IPE 712 L
FINAL COLOUR
Grey
MIXING RATIO (WEIGHT)
100:12
POT LIFE (min)
60-80
CHARACTERISTICS
Epoxy bicomponent system filled by aluminium. Good thermal conductivity, machinable, polishable.
TECHNICAL DATA SHEET
RESIN
RC 281
HARDENER
IPE 724
FINAL COLOUR
Red
MIXING RATIO (WEIGHT)
100:13
POT LIFE (min)
22-32
CHARACTERISTICS
Epoxy system filled by non-abrasive extenders and solvent-free.
TECHNICAL DATA SHEET

Keep in touch

Having read the privacy policy

× How can I help you?