One component acrylic and cementitious putty
In the sector of high-end decorative floors, Trias Chem provides a wide range of trowelled acrylic and cementitious putties. The systems differ from the chemical, mechanical and aesthetical point of view. All cycles have obtained the certification for performances CE.
GROUTING SYSTEM FOR PREPARATION OF THE SUBSTRATE
Two-component system for grouting of ceramics or natural stones. Suitable for medium/large groutings.
RESIN
RASAFUGHE A (liquid part)
RASAFUGHE B (powder part)
RASAFUGHE B (powder part)
TECHNICAL CHARACTERISTICS
Quick setting, two-component, acrylic product. Performance depends on dimensions of grout joints. Performance: 0,300 kg/mq.
ONE-COMPONENT ACRYLIC PUTTY
RESIN
SMA 35 H
FINAL COLOUR
Light grey
TECHNICAL CHARACTERISTICS
Water-based putty, small size quartz filled. Suitable for creating decorative floor and wall coatings with a trowel -effect finish.
STECHNICAL DATA SHEET
RESIN
SMA 41 H
FINAL COLOUR
Light grey
TECHNICAL CHARACTERISTICS
Water-based putty, medium size quartz filled. Suitable for creating decorative floor as first hand and wall coatings with a trowel -effect finish where a materic look is required.
STECHNICAL DATA SHEET
RESIN
SMA ARTE 20
FINAL COLOUR
White
TECHNICAL CHARACTERISTICS
One- component paste, water-based and very light to apply up to high thicknesses. Very easy to apply by spatula. Very good bonding to most frames.
STECHNICAL DATA SHEET
CEMENTITIOUS PUTTY
RESIN
SMC 70
HARDENER
SMC B
FINAL COLOUR
Ivory
MIXING RATIO
100+36
TECHNICAL CHARACTERISTICS
Fine-grained micro cement. Suitable for creating decorative floor and wall coatings with a trowel -effect finish.
TECHNICAL DATA SHEET
RESIN
SMC 82
HARDENER
SMC B
FINAL COLOUR
Ivory
MIXING RATIO
100+36
TECHNICAL CHARACTERISTICS
Coarse-grained micro cement. Suitable for creating decorative floor as first hand and wall coatings with a trowel -effect finish where a materic look is required.
TECHNICAL DATA SHEET
PRIMER AND BASED COAT
RESIN
Primer 12M
TA 86
HARDENER
-
-
FINAL COLOUR
Incolore
Incolore
MIXING RATIO
-
-
POT LIFE (min)
-
-
TECHNICAL CHARACTERISTICS
Primer is water-based and one component product. Very good permeation on porous surfaces. It is also used as a bonding layer for applications of one-component water-based putty.
Based coat is water-based and one component product. Very good permeation on porous surfaces.
TECHNICAL DATA SHEET
Keep in touch
